Home HP Integrated Lights-Out (iLO and iLO2) How to upgrade the firmware using SSH
How to upgrade the firmware using SSH PDF Print E-mail
Written by Carlo Cacciafesta   
Thursday, 07 January 2010 13:35

How to upgrade the firmware using SSH

The following commands can be used to upgrade the firmware on an HP iLO or iLO2 interface. This procedure is particularly useful when the iLO stops working properly and it's not accessible from the server or via HTTP(S).

Use the following procedure:

  • Use SSH to access the iLO device
  • Log in to the iLO using administrative credentials
  • Type the following command and press enter: "load -source http://ip_address/path/imagename.bin /map1/firmware"
  • The interface will download the new image and will reset itself
  • To check the firmware version, log in again using SSH and enter the following command: "show /map1/firmware version"




Copyright © 2024 SYSArea. All Rights Reserved.
Joomla! is Free Software released under the GNU/GPL License.